Last updated on November 12th, 2026 at 06:59 am
Custom Glass Bar Top & Countertop, Ocean Reef Club: 126 inches of light in a room that waits.
Dark cabinetry, layered surfaces, orchids on every counter. The design had already done its work before a single guest arrived. The only question left was what sits on the bar.
For a luxury home at Ocean Reef Club in Key Largo, Florida, Downing Designs designed and fabricated a 126 x 20 x 1.5 inch illuminated glass high bar and a 26 x 85 inch lower glass countertop with a top-mount sink, both in 1.5-inch low-iron kiln-formed glass with the hand-carved Suave wave, back-painted metallic silver and lit by independently controlled Ambiance Machine™ RGB LEDs. Installed with CM Glass, Miami, with zero holes through the glass. Design to installation: 10 weeks.

The best thing in an exceptional room
Ocean Reef Club is one of the most exclusive private residential clubs in the country, with orchids planted everywhere. It’s the kind of property where the glass has to be the best thing in the room, and the room is already exceptional.
The answer was two surfaces in one composition: a 126-inch illuminated high bar as the statement piece, and a lower 26 x 85 inch countertop with a top-mount sink as the worksurface. Both carry the Suave wave, designed so the pattern reads between them as one field rather than two objects.


The high bar and the lower countertop have independent Ambiance Machine™ systems, so the bar can run at 100% while the sink area stays readable as a working surface. A small secondary strip under the sink’s front edge runs at about 10% of the rear LED, which balances the whole composition.
Why back-paint metallic silver
Back-painting does two jobs. It hides whatever is behind or beneath the glass (cabinet contents, LED mounts, substrate) so nothing distracts from the lit surface. And it adds a reflective layer that bounces the LED light back through the glass, intensifying the glow from within.
Our metallic silver is a permanent two-part catalyzed urethane, not spray paint or vinyl film. It bonds chemically to the glass and won’t peel, crack or separate under LED heat over years of use.
Partner spotlight: CM Glass, Miami
CM Glass is our installation partner for South Florida projects where on-the-ground precision matters as much as what comes off the truck. At a property like Ocean Reef, with exacting access, installation windows and expectations, a trusted regional partner makes the difference. Design, fabrication and quality control stay in our studio. Every panel arrives installation-ready, and CM Glass sets it to the standard it was built to.
Both surfaces float with zero holes through the glass, held by ultra-clear silicone and gravity. The method is in our cantilevered glass bar top engineering guide.
Project specifications
| Detail | Ocean Reef Club, Key Largo FL |
|---|---|
| Project type | Custom glass high bar plus lower glass countertop with sink |
| Location | Private residence, Ocean Reef Club, Key Largo, Florida |
| High bar | 126 x 20 x 1.5 in |
| Lower countertop | 26 x 85 in, top-mount sink cutout |
| Glass | 1.5 in low-iron kiln-formed glass |
| Texture | Hand-carved Suave wave, flow synced between both surfaces |
| Back paint | Opaque metallic silver, permanent two-part catalyzed urethane |
| Hardware | Zero holes through the glass; ultra-clear silicone |
| Lighting | Ambiance Machine™ RGB LED, rear and front edge, independently controlled |
| Installation partner | CM Glass, Miami |
| Timeline | 10 weeks, design through installation |
| Fabricator | Downing Designs, Tampa, FL |
Questions about this project
Why back-paint a glass bar top metallic silver?
It hides everything behind or under the glass, including LED mounts and substrate, and it reflects LED light back through the glass to intensify the glow. We use a permanent two-part catalyzed urethane that bonds to the glass and won’t peel or crack under LED heat.
Can a high bar and a lower countertop be lit separately?
Yes. At Ocean Reef, each surface has its own Ambiance Machine™ system, so the bar can glow at full intensity while the sink area stays practical. A secondary strip at about 10% under the sink’s front edge balances the two.
How do two glass surfaces read as one design?
By carrying the same hand-carved texture across both and designing the flow so it continues from one to the other. Here, the Suave wave connects the high bar and the lower countertop into a single field.
Does Downing Designs install in Key Largo, Miami and South Florida?
Yes. We fabricate in Tampa and install throughout South Florida, including Key Largo, Miami, Fort Lauderdale, Boca Raton and Palm Beach, working with regional partners such as CM Glass, Miami when logistics benefit from local support.
How long did the Ocean Reef project take?
Ten weeks from design through installation, for both the 126-inch illuminated high bar and the lower countertop with sink.
Keep exploring
Glass. Lights. Ambiance.
A bar, a space, an idea: that’s enough to start. Fabricated in Tampa, installed across South Florida.
We don’t have office hours. We have phones.
