Projects Glass Bar Tops Glass Countertops Glass Surfboards Lava Stone Ambiance Café blog FAQ About Contact Begin a Commission
Menu

Last updated on November 12th, 2026 at 07:06 am

Project Showcase · Lake Norman, North Carolina

White Glass Island Countertops, Lake Norman: over 300 inches of white glass, and a magazine cover.

Two islands and a continuous sink run in white glass, fabricated in Tampa and installed by hand on the shores of Lake Norman. Featured on the cover of Augusta Homes magazine.

300″+White glass installed
118″Sink run, one piece
50″Island width
42Days, template to install
1Magazine cover
Project at a Glance

Downing Designs templated, fabricated and installed white glass countertops for a lakefront home in Cornelius, North Carolina, on Lake Norman: a 50 x 118.5 x 1.2 inch main island, a 118-inch sink run made as a single piece, and surrounding perimeter countertops. Built with Augusta Homes, the kitchen was featured on the cover of Augusta Homes magazine. Template to installation: 42 days.

White glass island countertop in a Lake Norman, NC kitchen on the cover of Augusta Homes magazine
Augusta Homes magazine cover · Lake Norman NC

A second home, a second white glass kitchen

This commission came directly from the client’s experience with an earlier Downing Designs installation at their Chapel Hill condominium.

“I absolutely love the white glass countertop in our Chapel Hill condominium.”

Kim Toothman, Homeowner, Lake Norman, NC
From the email commissioning this project

The kitchen was part of a whole-home renovation by Augusta Homes, one of the Lake Norman region’s premier luxury builders since 1997. The project appeared on the cover of Augusta Homes magazine and lives in their portfolio as “The Ride.”

White glass in lake light

White glass is fired at around 3,000°F, poured into a mold and polished to a luminous, permanently impervious finish. It isn’t painted or coated. The white is integral to the glass itself.

Under natural light it reads nothing like quartz or marble. No veining, no particulate, no pattern repeat, just a quiet luminosity that responds to light instead of simply reflecting it. Morning sun reads warm white. The blue-grey of an overcast Lake Norman afternoon pulls it cooler. The surface feels alive in a way engineered stone can’t.

White glass island countertop in a Lake Norman waterfront kitchen, Cornelius, NC
Lake Norman waterfront kitchen · Cornelius NC
Why one piece

A seam is a maintenance point, a visual interruption and a permanent reminder that a surface was assembled, not made. At this level, the 118-inch sink run had to be a single piece. It traveled from Tampa to North Carolina intact, and it took three craftsmen to set the main island. At these dimensions, 1.2-inch glass demands that respect. It’s also heavy.

Templated by the person who builds it

  • TemplateJeff Downing flew from Tampa to Charlotte, drove to Cornelius and took every measurement himself: the actual space, the actual cabinets, the actual sight lines to the lake. No subcontractor, no template service.
  • FabricateBack in Tampa, every surface was built to that template, including the single-piece sink run.
  • Install, day 42Back to Lake Norman with a crew. The surfaces arrived ready to set: no field cuts, no shimming, no adjustment.
White glass perimeter countertop in a Cornelius, NC kitchen on Lake Norman
Perimeter countertops · Cornelius NC

Project specifications

Detail Lake Norman, NC
Project type White glass island countertops and continuous sink run
Location Private lakefront residence, Cornelius, NC, on Lake Norman
Main island 50 x 118.5 x 1.2 in
Sink run 118 in continuous, single-piece fabrication
Additional surfaces Surrounding cabinet countertops throughout the kitchen
Material White glass, luminous gloss, nonporous, maintenance-free
Builder Augusta Homes, Lake Norman, NC
Press Augusta Homes magazine cover; portfolio project “The Ride”
Timeline Templated and installed within 42 days
Fabricator Downing Designs, Tampa, FL; personally templated and installed by Jeff Downing

Questions about this project

What is white glass, and how is it different from quartz or marble?

White glass is fired at around 3,000°F, poured into a mold and polished to a permanently impervious bright white finish. The color is integral, not painted or coated. Unlike quartz or marble it has no veining, particulate or pattern repeat, and it responds to changing daylight with a quiet luminosity.

Why was the 118-inch sink run made as a single piece?

A seam is a maintenance point and a visual interruption. Making the 118-inch sink run in one piece kept the surface continuous. It traveled intact from Tampa to North Carolina, and the main island took three craftsmen to set.

Can a Tampa fabricator template and install a kitchen in North Carolina?

Yes. Jeff Downing flew to Charlotte, templated the Cornelius kitchen personally, fabricated every surface in Tampa and returned with a crew to install within 42 days of templating. The pieces arrived ready to set, with no field cuts or shimming.

What maintenance does a white glass countertop need?

None beyond ordinary cleaning. White glass is nonporous and needs no sealing, waxing or periodic treatment. It doesn’t stain, doesn’t react with citrus or alcohol, and doesn’t etch like marble. A damp cloth handles daily cleaning; glass cleaner handles the rest.

Do clients come back for white glass?

This one did. The homeowner commissioned the Lake Norman kitchen because she loved the white glass in her Chapel Hill condominium. She has now lived with white glass in two homes.

Keep exploring

Glass. Lights. Ambiance.

A space and an idea: that’s enough to start. We travel for the template.

Begin a Commission

We don’t have office hours. We have phones.

(813) 784-5211  •  [email protected]