Last updated on November 11th, 2026 at 04:37 pm
Park City Glass Bar Top: a wave of light in the mountains.
A 92-inch arced low-iron glass bar top, fused and textured by hand at over 1,400°F, set into a Park City kitchen where soft, muted tones let the glass become the one thing you look at.
Downing Designs designed, fabricated and shipped a 92-inch arced glass bar top in 1.5-inch low-iron kiln-fused glass to a home in Park City, Utah. The top runs 16 inches deep at each end and 24 inches at the apex, carries a hand-carved feathered wave designed live online with the homeowners, and is lit by a fully concealed dotless RGB LED system. It was custom-crated, fully insured and delivered by lift gate from our Tampa studio.

The brief: one thing that stops you
When Tom Petro first sketched his kitchen, he had a clear instinct about restraint. The lines were simple, the palette soft and muted, and everything in the room was chosen to step back so one element could step forward. That element is the bar top: an arcing sweep of low-iron glass that catches daylight in one hour and turns to liquid cobalt the next.
“The lines are simple, the colors soft and muted, and so the glass top will be the feature and will not be in competition with other features.”
Tom Petro, Homeowner, Park City, Utah
What arrived, installed and lit, reads as moving water: a feathered wave pattern drawn interactively over the internet with Tom and his wife. The texture isn’t a stock finish. It’s a record of a conversation between the maker and the people who live with it every day. See how we design texture with clients.
What the bar top is made of
A single arced span of 1.5-inch low-iron glass, fused and textured in the kiln at over 1,400°F. Low-iron is the difference between glass that reads clean and glass that reads green at the edges. At an inch and a half thick, that clarity lets light travel through the wave instead of stopping at the surface.
The texture is the feature. Mountain light comes through the kitchen windows and the feathered wave reads like water over stone.
A fully concealed, dotless RGB LED runs the length of the arc. No visible points of light, just a continuous field of color drifting from daylight-neutral to deep cobalt.



Project specifications
| Detail | Park City, Utah |
|---|---|
| Location | Private residence, Park City, Utah |
| Glass | 1.5 in low-iron, kiln-fused architectural glass |
| Design | Custom arced bar top, 92 in long |
| Dimensions | 16 in deep at each end, expanding to 24 in at the apex of the curve |
| Texture | Hand-carved feathered wave, designed collaboratively with the homeowners |
| Lighting | Fully concealed dotless RGB LED |
| General contractor | Mark Newman |
| Shipping | Custom crate, insured for full replacement value, lift gate delivery |
| Fabrication | Downing Designs, Tampa, Florida |
Building in ski country
Park City is a beautiful place to work and a difficult one to schedule. Panoramic mountain views, a village full of good restaurants and interesting people, and fresh snow that turns a routine install into a logistics problem. General contractor Mark Newman was excellent throughout, keeping crews on site through the weather. The honest truth about Park City in winter is that most of the crew would rather be on the mountain. Getting the work done anyway is its own kind of craftsmanship.
How glass this size crosses the country
Ninety-two inches of textured glass doesn’t travel casually. The install is only the last hour of a journey that’s protected from the first mile.
Each piece is built into its own crate, engineered around its exact dimensions and profile.
Insured for full replacement value, door to door, for the entire trip.
Lowered to ground level by lift gate. No dock, no drop, no risk at the last step.
Questions about this project
Can Downing Designs make a glass bar top for a home outside Florida?
Yes. This 92-inch arced bar top was fabricated in our Tampa studio and shipped to Park City, Utah. Pieces are custom-crated, insured for full replacement value door to door, and delivered by lift gate.
How was the texture designed if the client was in Utah?
Interactively, over the internet. We drew the feathered wave pattern live with the homeowners during the design process, so the finished texture is a record of that conversation rather than a stock finish.
Why use low-iron glass for an arced bar top?
Ordinary glass reads green at the edges. Low-iron glass stays clean and clear, and at 1.5 inches thick that clarity lets light travel through the texture instead of stopping at the surface, both in daylight and when the LEDs are on.
What are the dimensions of the Park City bar top?
It is 92 inches long and 1.5 inches thick, running 16 inches deep at each end and widening to 24 inches at the apex of the curve.
How is the bar top lit?
With a fully concealed dotless RGB LED system along the length of the arc. There are no visible points of light, just a continuous field of color that can shift from daylight-neutral to deep cobalt.
Keep exploring
Glass. Lights. Ambiance.
Every glass piece is designed with your direct input, wherever you are.
We don’t have office hours. We have phones.
